DCR-5320PRO 3-in-1 High Definition Triple Macro Conversion Lens
The DCR-5320PRO High Definition Macro Conversion lens is particularly designed to use with the high-end digital, film and hi-vision cameras, resulting in an amazing resolution power of 200L/mm at center (MTF 30%) with a low dispersion. With the Macro lens attached on the camera's lens, it makes possible to approach the object very close for macro shooting. The model consists of two independent lenses, one is with 2-diopter magnification and the other with 3-diopter. It also makes a 5-diopter lens by coupling the both lenses together. Taking advantage of using in three ways, you can shoot the object at the distances of either 50cm or 30cm or 17cm, depending upon the nature of a subject. All lens glass elements are fully coated for the optimum light transmittance and fine image quality.
The adapter rings which fit to the 52mm, 55ｍｍ, 58mm, 62mm, 67mm, 77mm, 82mm threads (except 72mm) are sold separately.
* MTF30%-theoretical number obtained.
The DCR-5320PRO Macro Close-up lens is made of two independent lenses of 2-diopter magnification and 3-diopter one, both fabricated in doublet formula for less color aberration at corners. By putting the two lenses together, it creates the high 5-diopter magnification macro close-up conversion lens with the excellent high resolution power of 200 lines/mm at center (MTF30%) at center.
(*the distance shown is measured from top of the lens to the surface of object when the lens is set at infinity).
How ?
Add one more DCR-5320PRO onto the same set, giving you
8 different diopter choice of 2, 3, 4, 5, 6, 7, 8 and 10.
The DCR-5320PRO Macro Close-up lenses are compatible with the latest High Definition cameras introduced in the market lately. The shooting distance will be either at 50cm (2-diopter lens), 30cm (3-diopter lens) and 17cm (5-diopter lens) with an infinity setting of the camera lens.
● It is recommended to use the 2-diopter and 3-diopter lenses with the camera lens set at longer than 50mm FL (35mm film equiv.), and 100mm FL with the 5-diopter lens.. There may be a possibility of vignetting (darkened corners) happens when the FL (focal length) used is set at shorter than the above mentioned.
● The all figures and numbers of the lenses mentioned in this explanation were the ones obtained when the focusing distance of taking lens was set at infinity. Usually, when the focusing distance is set at nearer than the infinity, the focusing could be done at the nearer point than the described in this explanation.
● While the Macro lens is attached on, do not use the built-in flash. If you do, there would be a shadow of the lens barrel shown in the picture taken.
● There might be a possibility of not functioning of a remote control when the Macro lens is attached. Please try a rehearsal shot first before using it.
● Please detach the Macro lens and holder before carrying the camera around after completing the shooting.
● The slight vignetting (darkened corners) could be shown on the taken picture, though it did not appear on the LCD monitor or viewfinder.
● Knowing the rather heavy weight (395g) of the Macro lens, be careful in holding the lens and camera firm for shooting.
● When using with an interchangeable lens of 35mm digital SLR camera, make focusing manually, except with the one made of an Inner Focusing system. ● Screw-thread pitch size is 0.75mm unless specified.
● The cosmetic design and optical specifications are subject to change without a prior notice.
The lens includes a snap-on universal mount suitable for 52mm to 67mm filter size.
DCR-150 Macro lens obtains the maximum macro magnification power when set at the most telephoto position of zoom lens. The lens is made of high index optical glass elements which produce rich and razor sharp image.
49mm Front filter size
2G/3E Hi-Index Optical Glass
Snap-on Universal Adapter
Compatible with HD-Camcorder
DCR-150 is also suitable to High Definition Camcorders.
Macro Comparison shots taken with 3-CCD Camcorder.
A LIST OF ADAPTERS for your Camcorder filter thread sizes
(480KB)
(3400KB)
(600KB)
(3600KB)
● The specifications and cosmetic designs may change without prior notice.
DCR-150 may cause vignetting image( darkening one or more corner of the taken image )when used with wideangle lens.
All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality. ● Screw-thread pitch size is 0.75mm unless specified. ●Exposing the conversion lens to a warm atmosphere in an instant way from the cold area may create some dews on and inside the lens. When it happened inside the lens, keep the lens in a dry area till the dews disappear before using. Repeating such situation may leave dirt spot-(mildew) and affect the image. ●All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality. ●The lens is neither made for dust-free nor moisture/water-proof.
RAYNOX® is the registered trademark of Yoshida Industry Co., Ltd. Tokyo. Other brand names and the models are the trademarks of their manufactures or their subsidiaries and may be registered in certain jurisdictions.
The lens includes a snap-on universal mount suitable for 52mm to 67mm filter size.
DCR-250 Super Macro lens obtains the maximum macro magnification power when set at the most telephoto position of zoom lens. The lens is made of high index optical glass elements which produce rich and razor sharp image.
49mm Front filter size
2G/3E Hi-Index Optical Glass
Snap-on Universal Adapter
Compatible with HD-Camcorder
DCR-250 is also suitable to High Definition Camcorders.
Macro Comparison shots taken with 3-CCD Camcorder.
A LIST OF ADAPTERS for your Camcorder filter thread sizes
● The specifications and cosmetic designs may change without prior notice.
DCR-250 may cause vignetting image( darkening one or more corner of the taken image )when used with wideangle lens.
All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality. ● Screw-thread pitch size is 0.75mm unless specified. ●Exposing the conversion lens to a warm atmosphere in an instant way from the cold area may create some dews on and inside the lens. When it happened inside the lens, keep the lens in a dry area till the dews disappear before using. Repeating such situation may leave dirt spot-(mildew) and affect the image. ●All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality. ●The lens is neither made for dust-free nor moisture/water-proof.
RAYNOX® is the registered trademark of Yoshida Industry Co., Ltd. Tokyo. Other brand names and the models are the trademarks of their manufactures or their subsidiaries and may be registered in certain jurisdictions.
The combination of MSN-202 and SONY HDR-FX7/HVR-V1 display panel makes it easy to capture a tiny object from the distance of 32mm to the object at maximum telephoto position.
Magnification: 25-Diopter
Lens construction: 3G/4E Optical coated glass elements
Image size: 1.9mm width
Effective zooming without vignetting: 12x - 20x zoom
Front filter size: None
Mounting threads: 37mm
Size/Weight: 22 x 42mm/60g(2.1oz)
The DCR-2025PRO/DCR-2020PRO lens is originally designed to produce optimum image quality when used with a camera/camcorder incorporated with 8-time or higher zoom lens.However, depending upon the matching with the type of camera lens it may produces a superb image quality with a zoom lens less than 8-time ratio such as 4 times or 6 times.
Compatible with HD-Camcorder
DCR-2025PRO/DCR-2020PRO are also suitable to the High Definition Digital Camcorders and DVCAM such as SONY HDR-FX7, VX-2100, VX-2000, VX-1000, PD-170, PD-150, PD-100, TRV-900,/950 Canon GL-1, GL-2, XM-1/2. etc.
A LIST OF ADAPTERS for your Camcorder filter thread sizes
● RA6243 F62-M43mm Adapter ring
for 43mm filter size.
(DCR-2025PRO-Included accessory)
● RA6252 F62-M52mm Adapter ring
for 52mm filter size.
(DCR-2025PRO/DCR-2020PRO-Included accessory)
● RA6255 F62-M55mm Adapter ring
for 55mm filter size.
(DCR-2025PRO-Included accessory)
● RA6258 F62-M58mm Adapter ring
for 58mm filter size.
(DCR-2025PRO/DCR-2020PRO-Included accessory)
NEW RA6272 F62-M72mm Adapter ring is also available.(Sold separately)
●** DCR-2025PRO/DCR-2020PRO may cause vignetting image( darkening one or more corner of the taken image )when used with this model.
●DCR-2025PRO/DCR-2020PRO was designed to use at most Telephoto position of camera's zoom lens.
●Zooming towards wide angle side while the lens is attached may result in some degree of darkening at the corners of the frame(vignetting). Use at the maximum telephoto position of the zoom lens.
●The remote control function may not work properly when the DCR-2025PRO/DCR-2020PRO is attached. Use the LCD monitor screen for getting a precise picture framing, not through the optical view finder.
●Be careful in handling the camera with the lens attached, such as supporting or protecting the lens by your own hand.
●The specifications and cosmetic designs may change without prior notice. ● Screw-thread pitch size is 0.75mm unless specified.
●Do not use the built-in flash while the DCR-2025PRO/DCR-2020PRO is attached. ●Exposing the conversion lens to a warm atmosphere in an instant way from the cold area may create some dews on and inside the lens. When it happened inside the lens, keep the lens in a dry area till the dews disappear before using. Repeating such situation may leave dirt spot-(mildew) and affect the image. ●All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality. ●The lens is neither made for dust-free nor moisture/water-proof.
RAYNOX® is the registered trademark of Yoshida Industry Co., Ltd. Tokyo. Other brand names and the models are the trademarks of their manufactures or their subsidiaries and may be registered in certain jurisdictions.
The DCR-CF185PRO/DCR-FE180PRO lenses weigh 565g (1.24lbs)/685g (1.5 lbs)and they are rather heavy stuff and may limit the way of shooting condition.Be careful in handling the camera with the lens attached, such as supporting or protecting the lens by your own hand.Zooming may be limited to f=10mm(1.1x zoom) while the DCR-FE180PRO is attached with RT6265T/W Tube adapter. Do not zoom further than 10mm while the lens is attached.Zooming may be limited to f=13mm(1.4x zoom) while the DCR-CF185PRO is attached with RT6265T/W Tube adapter. Do not zoom further than 13mm while the lens is attached.Raynox telephoto conversion lenses were designed to use at maximum Telephoto position of camera's zoom lens. All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality.Do Not use the built-in flash while conversion lens is attached.
*The cosmetic designs may change without prior Notice.
.jpg)
.gif)
.gif){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg)
